Welcome to FolkDeal Online Store

3D Printer Auto Leveling Sensor with Auto Leveling 3D Touch Feature

3D Printer Auto Leveling Sensor with Auto Leveling 3D Touch Feature

Regular Price: $50.00

Special Price $36.99

Availability: In stock

Shipping : Free Shipping

Dispatch : Ships within 1-3 business days

- +
OR
Product Description

Details

3D Printer Auto Leveling Sensor with Auto Leveling 3D Touch Feature

Specifications:

  • Voltage: 5V
  • Current: 15mA
  • Max. Current: 300mA
  • Cable length: 150mm
  • Net Weight: 10g
  • Shipping weight: 25g
  • Wiring
  • 3-pin: Brown (-, GND), Red (+5V), Orange (control signal)
  • 2-pin: Black (-, GND), White (Z min)

Package List:

  • 1 X 3DTouch Auto leveling sensor
  • 1 X 3Pin Straight Pin
  • 1 X 2Pin Straight Pin
  • 2 X Screw & Nut & Washer
  • 2 X Dupont Housing Shell 3Pin
  • 2 X Dupont Housing Shell 2Pin
  • 3 X Dupont Housing Shell 1Pin
  • 14 X Dupont Terminal
  • 1 X 10KΩ 1/8W Resistor

Notes:

  • 3D touch auto leveling sensor is not plug_and_play; you will need to do some modification to your firmware and for some control board, you may need to do some soldering work to the connector. What's more, this sensor is not compatible with some boards, such as Melzi V2.0, V3.0 and some MKS board. Please note the wire connection and study if your control board supports 3D touch before order. We have prepared the pins for you.
  • For detailed instructions, please refer to the user manual from this link

Cautions:

  • Additional power supply will be needed in case your board does not supply enough amperage.
  • Electronic devices can be damaged or even destroyed if connected to wrong polarity. [wrong terminal connect to 5V(+) and GND(-)]
  • Pulling/pushing hard on the push-pin can damage 3DTouch and make it less accurate.
  • Fix push-pin with locking paint after reassembling or adjusting core.
  • Do not remove or deform elastic material attached on the push-pin.
  • 3D Printer Auto Leveling Sensor With Auto Leveling Feature 3D Touch Free Shipping
  • 3DTouch features simple, smart and precise. It could work with nearly any kind of bed materials, such as glasses, woods, metals and so on.
  • The main functions and controls of 3DTouch are the same as most auto bed leveling sensors, which consists of a RC servo and a micro switch, thus, 3DTouch can be used on almost every 3D printer control board.
  • By using progressively designed solenoid and hall sensor, 3DTouch can integrate high precision in such a simple structure. To make it more user-friendly and to bring you more enjoyable printing experience we add many smart functions such as self-test, false alarm, alarm release and test mode for M119.
Reviews

Be the first to review this product

Write Your Own Review

You're reviewing: 3D Printer Auto Leveling Sensor with Auto Leveling 3D Touch Feature

How do you rate this product? *

 
1 1 star
2 2 star
3 3 star
4 4 star
5 5 star
Price
Value
Quality

You may also be interested in the following product(s)